Guide · Store and building operations

How are supermarkets being hacked now? The help‑desk reset and the fridge‑controller attacks

Recent supermarket attacks have used two verified routes, impersonating a colleague to obtain an account reset, and reaching refrigeration controllers left on the public internet. Here is what official sources have confirmed, and what a store or building night line should refuse.

Illustration of a supermarket chiller cabinet beside a wall-mounted refrigeration controller whose screen shows a temperature line climbing, a desk telephone at night with a speech bubble holding a crossed-out key, a crescent moon, and a wall calendar with one date marked by a small orange dot

Supermarkets are being hacked through people and through plant. In April 2025 attackers impersonated colleagues to obtain account resets at UK retailers, according to Co-op’s parliamentary evidence and the Marks and Spencer chairman, and from 11 October 2026 they have been compromising internet-exposed refrigeration controllers across several EU countries, with a further wave on 1 and 2 November 2026, according to ENISA and Belgium’s Centre for Cybersecurity.

Kreedl is our product. The incidents, methods and product descriptions in this guide were checked against public primary sources on 10 November 2026.

What do official sources say is happening now? TL;DR

Two verified routes matter to anyone who answers a night phone for a store or a building. One is a caller asking for a reset or a change of access. The other is a refrigeration controller reachable from the public internet.

How supermarkets are being hacked now, in one table
RouteWhat official sources confirmWhat they do not confirm
Help-desk impersonationCo-op said attackers impersonated a colleague, answered security questions and obtained an account reset on 25 April 2025. M&S said the 17 April 2025 entry was sophisticated impersonation and involved a third party.On 4 May 2025 the NCSC said it could not yet say whether the retailer incidents were linked.
Exposed refrigeration controllersENISA reports incidents affecting commercial refrigeration systems in several EU Member States since 11 October 2026, and a further wave on 1 and 2 November. Belgium’s cyber centre says attackers forced supermarket and cold-store controllers into defrost cycles of up to +50C overnight.The official alerts cited here do not name individual store brands or describe a help-desk reset.
Broader grocery IT disruptionAhold Delhaize disclosed a cybersecurity issue on 12 October 2026, later confirmed as malicious, and estimated a €200 million to €250 million cut to fourth-quarter net sales. UNFI reported unauthorised activity on 9 June 2025 that disrupted deliveries to grocery stores.Neither company has published the entry method in the statements checked for this guide.

How did attackers get into UK supermarket systems in 2025?

They used impersonation, not a guessed password. Co-op’s Rob Elsey told Parliament that attackers impersonated a colleague, answered security questions and obtained an account reset about an hour before they used the account maliciously.

The initial attack took place on 25 April 2025. Co-op said its defences spotted the malicious behaviour within minutes, restricted the account and later prevented ransomware from being deployed. Stores remained open. Attackers still copied member information limited to names, addresses, contact details and dates of birth, a point later repeated by the Co-op Group CEO in the NCSC Annual Review 2025.

Marks and Spencer’s chairman, Archie Norman, told the same inquiry that the initial entry on 17 April 2025 occurred through sophisticated impersonation. The callers appeared as an individual, with that person’s details. Part of the point of entry also involved a third party. M&S became aware of the intrusion on 19 April and went public on 22 April. Norman said about 50,000 people worked on the company’s systems, including store colleagues and contractors.

The NCSC said on 4 May 2025 that there had been press speculation about a group known as Scattered Spider and about help-desk password and multi-factor authentication resets. It was not yet able to say whether the retailer incidents were linked, and told organisations to review how the help desk authenticates staff before resetting passwords, especially for privileged accounts.

A joint advisory from the FBI, CISA, the UK NCSC and other partners, last revised on 29 July 2025, describes how Scattered Spider targets large companies and their contracted IT help desks by phone or SMS, including password resets, multi-factor transfers and requests to run remote-access tools. The advisory describes a method used against commercial facilities. It is not, by itself, an official attribution of the M&S or Co-op incidents to that group. Security questions that an impersonator can answer are not a safe gate for a reset.

What is happening to supermarket fridges in 2026?

Attackers have been reaching remote controllers for commercial refrigeration through management interfaces left on the public internet. France’s CERT-FR first warned about these compromises on 12 October 2026. ENISA, the European Commission, Europol’s European Cybercrime Centre and EU incident-response networks then reported a further wave on 1 and 2 November 2026.

Sweden’s CERT-SE said on 2 November 2026 that connected freezer and cooling systems in grocery retail had been affected. Belgium’s Centre for Cybersecurity said on 3 November 2026 that a new wave had targeted supermarkets and cold stores in Belgium, Luxembourg, the Netherlands, Sweden, Ireland and Estonia.

The Belgian advisory names the method. Attackers exploited publicly exposed management interfaces on Danfoss AK-SC and AK-SM series devices and on Dixell xweb and Copeland xweb devices. They forced units into defrost cycles of up to +50C overnight, causing complete stock destruction. Investigations pointed to unpatched firmware, internet-exposed web interfaces and unchanged default vendor credentials. CERT-FR makes the same core point. A management interface should not sit on the public internet.

This is a building-systems problem, not another help-desk reset. The people who notice it first are often the night manager or whoever answers the temperature alarm.

Ahold Delhaize’s October incident is a separate fact. The company disclosed a security issue on 12 October 2026 and later confirmed malicious activity. It notified the Dutch National Cyber Security Centre within 24 hours and filed a police report on 19 October. On 4 November it estimated a €200 million to €250 million cut to fourth-quarter net sales and a €75 million to €100 million cut to operating income. It has not published the entry method.

What should an out-of-hours line never do?

It should never reset credentials, change multi-factor authentication, share alarm codes or grant access to a building system because the caller sounds informed. Those actions belong to a named verification process.

Write the refusals down so a night operator, answering service or AI line cannot invent an exception. The list below is an operational recommendation, not a statute.

What a night line should refuse, and what it should do instead
Caller requestWhy it is dangerousWhat the line should do instead
Reset my password, unlock my account or move my multi-factor authentication to a new phoneThis is the method Co-op described, and the process the NCSC told organisations to tighten.Refuse, log it and escalate to the named identity owner through a pre-agreed channel, not a number the caller provides.
I am from IT. Install this remote-access tool so I can fix your till, camera or controllerThe FBI and CISA advisory records attackers posing as IT staff and directing employees to run remote-access tools.Refuse. Do not install software on an inbound instruction. Contact the approved IT owner on a number you already hold.
I am the refrigeration contractor. Open the controller to the internet, give me the default login or raise the defrost limitCERT-FR and the Belgian advisory say exposed interfaces, default passwords and altered defrost settings are what attackers have used.Refuse any change that exposes a controller or uses a default password. For a genuine temperature alarm, dispatch an approved vendor and verify them on a known number.
I am at the back door. Someone at head office said you would let me into the plant roomVendor impersonation uses the same trust as a help-desk reset. The prize is physical access.Do not share door codes. Check the approved contractor list and a callback number you already hold. If the visit is unscheduled, escalate to the on-call manager.
I need temperature logs, camera footage or a staff rota sent to this addressAfter a public incident, follow-on callers may harvest data or create a second way in.Do not send records to an address supplied on the call. Pass the request to the owner of that data.

A useful reply is:

I can log this and pass it to the person who owns that system. I cannot reset an account, change access or open a controller from this line. If this is a genuine temperature or safety fault, I will raise it with the approved contractor we already have on file.

That wording is a suggested script, not legal advice. If anyone is in immediate physical danger, the caller should use the emergency services first. Treat extra urgency as a reason to verify, not a reason to skip verification.

How do teams handle suspicious access requests today?

Most teams already have a night arrangement. The question is whether it can tell a genuine fault from a request for access.

Voicemail or an unmonitored shared inbox

Best for: low-volume routine messages that can wait until morning, behind a separate staffed route for anything that could be a safety or access request.

A timestamped email is useful evidence later. It cannot refuse a reset or dispatch a refrigeration engineer at 2 AM.

Kreedl answers that night request on the first contact, applies your written rules and either dispatches an approved contractor or escalates the request with a full brief.

An on-call facilities or store manager

Best for: portfolios where one person knows the sites, the approved contractors and when a plant-room visit is real.

A human who knows the building can hear when a story does not fit. Continuity is the weakness. A missed call or a decision that lives in one person’s memory is how a convincing caller gets through on the second attempt.

Kreedl answers the first call every time and briefs the on-call manager with the site, the request, the history and a recommended action, so their judgement starts from a complete record.

A staffed answering service

Best for: teams that want a human voice and can give operators a short script, an approved contractor list and a clear list of actions they must never take.

If an operator can be persuaded to pass on a password, a door code or a request to expose a controller, you have rebuilt the help-desk problem under another name.

Kreedl applies the same written boundaries on phone, WhatsApp, SMS and email, dispatches only vendors you have approved, and logs every refusal and escalation.

Where does Kreedl fit?

Kreedl handles the communication layer so your security process holds at night. Its public product page describes an AI colleague that answers calls and messages from tenants and on-site teams, including store teams, on phone, text, WhatsApp and email, works out where the issue is and how urgent it is, coordinates repairs with approved contractors within limits you set, follows up until the job is done and logs it.

You set the house rules and the boundaries. You choose which vendors it may dispatch, up to what value, and which situations always come to a human. A genuine night temperature alarm can go to the approved refrigeration vendor on your list. A caller asking for a password reset, a remote-access install or a plant-room code is escalated fully briefed, with the history and a recommended action, to the person who is allowed to decide.

Every action it takes is logged and auditable. Average pickup is given as 1.1 seconds, the same at 3 PM and at 3 AM, on every channel. That matters when a temperature alarm and an impersonation attempt can arrive on the same night line.

For the broader question of whether a night line picks up, timestamps a report and keeps a record, see our guide to out-of-hours repairs. The same tests apply here. The line should also apply your written refusals on every channel.

What should you check tonight?

Start with anything that can unlock a system or destroy stock. These are recommended operations drawn from the official advisories, not extra legal duties.

  • Write down the actions the night line must refuse, including password resets, multi-factor changes, remote-access installs, door-code sharing and any request to expose a controller to the internet.
  • Give every site an approved contractor list with callback numbers that you already hold. Do not call a number supplied by the inbound caller.
  • Ask your refrigeration provider whether any Danfoss AK-SC or AK-SM, Dixell xweb or Copeland xweb interface is reachable on a public IP address. CERT-FR and the Belgian advisory both say to remove that exposure, change default passwords, update firmware and check defrost ranges. The Belgian advisory says attackers raised those ranges.
  • Before you cut a data feed to a refrigeration contractor, check the service and insurance contract. Both official advisories warn that this can have contractual effects.
  • If remote access is still required, restore it only through a protected route such as a virtual private network.
  • Tell teams that a caller claiming to be IT or a contractor must be verified on a known number, even if they answer security questions, and name the humans who own identity resets and plant-room access.
  • Decide how a genuine high-temperature alarm is dispatched after hours, including who is woken when the first contractor does not answer.

ENISA notes that, from 11 September 2026, manufacturers must report severe incidents and actively exploited vulnerabilities under the Cyber Resilience Act. The main product-security requirements apply from 11 December 2027. Those are manufacturer duties.

How do you know your night line works?

Test whether it refuses the dangerous request and still handles the genuine fault. Use a pre-briefed test so you do not trigger a real emergency response or a real plant-room visit.

Run three labelled tests. First, a caller claiming to be IT asks for a password reset or a multi-factor change. The line should refuse and escalate. Second, a caller claiming to be the refrigeration contractor asks someone to open the controller to the internet or read out a default password. The line should refuse and verify the contractor on the number you already hold. Third, a high-temperature alarm is reported at a named store. The line should identify the site and dispatch the approved vendor.

The next morning, inspect the records for the time, the site, the request, the refusal and whether the genuine alarm reached someone who could act. Then repeat the first test when the usual on-call person does not answer. For a wider testing method, see our out-of-hours repairs guide.

When is Kreedl a good choice for out-of-hours lines?

Kreedl is a good choice when you need one night line that answers store teams, tenants and on-site staff, applies your written rules, dispatches approved contractors and escalates everything else to a human with a full brief. That is how a security process still holds after hours.

It fits especially well in these situations.

  • Multi-site grocery, retail and residential portfolios. The public page lists grocery stores, retail chains, residential apartments and shopping malls, so one set of house rules can cover many sites.
  • Night temperature and plant alarms. A store team reporting a warm freezer gets a first response, a check of urgency and a call to the right contractor from your approved list, within your limits.
  • Contractor dispatch with approved vendors only. You decide who may be sent and up to what value, rather than using a number supplied by the inbound caller.
  • Consistent written refusal rules on every channel. Phone, WhatsApp, SMS and email all reach the same rules, so a request to reset credentials or open a controller always comes to a human.
  • Logging, escalation and all-hours coverage. Every action is logged and auditable. Anything outside your boundaries arrives fully briefed, with the photo, the history and a recommended action. Pickup is the same at 3 PM and at 3 AM.

Your security and engineering teams keep ownership of password resets, network monitoring and plant-system changes. Kreedl handles the night conversation so those processes are followed rather than improvised.

What else do store and building teams ask?

Not in the public statements checked for this guide. Ahold Delhaize confirmed malicious activity, took websites and apps offline as a precaution, notified the Dutch NCSC and filed a police report. Until an official source publishes the entry method, treat the incident as grocery-IT disruption, not as proof of a help-desk reset or a fridge-controller compromise.

No. Co-op’s evidence is that attackers could impersonate a colleague and answer security questions. Refuse on the night line and use a verification method that does not rely on details an impersonator can collect.

The official refrigeration alerts describe attackers using exposed management interfaces to change how the plant behaves, including high-temperature defrost cycles. That is operational-technology disruption, not the account-reset path described by Co-op, and the alerts cited here do not describe encryption of store PCs after a ransom note.

Yes, wherever a night line can be asked to reset access, admit a contractor or change a building system. Housing and build-to-rent sites have plant rooms and out-of-hours vendor visits too.

If a management interface is reachable on a public IP address, CERT-FR and the Belgian advisory say to remove that exposure. Restore any needed remote access through a protected route, and check the contract and insurance before you cut a contractor’s data feed. If a device may already be compromised, follow the official steps, including a factory reset and then hardening, because a reset alone is not enough while the device remains exposed.

Which sources support this guide?

Sources checked on 10 November 2026.

  1. Co-op oral evidence to the Business and Trade Sub-Committee (8 July 2025)
  2. Marks and Spencer oral evidence to the same inquiry (8 July 2025)
  3. Incidents impacting retailers, recommendations from the NCSC (4 May 2025)
  4. CISA, FBI, NCSC and partners, Scattered Spider advisory AA23-320A (last revised 29 July 2025)
  5. Open letter from the Co-op Group CEO in the NCSC Annual Review 2025 (14 October 2025)
  6. CERT-FR alert CERTFR-2026-ALE-012 (12 October 2026, updated 16 October 2026)
  7. ENISA joint statement on cyber incidents in refrigeration systems across the EU (4 November 2026)
  8. CERT-SE notice on connected freezer and cooling systems (2 November 2026)
  9. Centre for Cybersecurity Belgium advisory on remote refrigeration controllers (3 November 2026)
  10. Ahold Delhaize disclosure, 12 October 2026; 13 October update; 19 October update; Q3 2026 results (4 November 2026)
  11. UNFI systems update (9 to 26 June 2025)
  12. Kreedl product page and live test page (product capabilities and demonstration)

This article is general information, not legal advice. Rules, alerts and company statements are correct as of 10 November 2026. Check the latest official advice before you change access procedures or building-system settings.

Want to hear how Kreedl handles a night request?

Book a demo and load your sites, approved contractors, house rules and escalation path. Or try a live test call now and hear the agent handle a night request the way a store manager or tenant would. Check that a temperature alarm is dispatched to an approved vendor and that a request for access is escalated with a full brief.

Want to see it on your buildings?

Book a demo to see how Kreedl answers a night report, triages it against your rules and logs every step. Or call the agent yourself first.

Try it live